THANK YOU and IMPORTANT NOTICE

 

The Envox team thanks you for your trust and support – you have ensured that the goal of the crowdfunding campaign was achieved and the production of the EEZ BB3 came to life.

 

We believe you will like the EEZ BB3 which is offered completely as open source which we will continue to improve and upgrade. Your comments and feedback is therefore highly appreciated.

 

If you need assistance, please contact us or post your problem on EEZ Discord server or on the EEVblog forum.

Feel free to open a New issue in GitHub (hardware or firmware related). Please check first to see if a similar issue already reported.

 

* * *

 

EEZ BB3 Enclosure & Bare Boards kit is not an end user product. Assembling requires specialist knowledge of electronic circuits, purchasing of parts in accordance with BOMs, intermediate soldering skills, and basic computer programming skills.

By using the kit, the user acknowledges and agrees that any use of assembled EEZ BB3 is solely at the user’s own risk, and that user is solely responsible for compliance with all legal and regulatory requirements in connection with such use.

 

Envox d.o.o. supplies EEZ BB3 Enclosure & Bare Boards kit AS IS, without any warranties, with all faults, at the buyer’s and further users’ sole risk. The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies Envox d.o.o. from all claims arising from handling or using any part of the EEZ BB3 neither assembled nor in kit form.

 

Please note that while EEZ BB3 power module outputs are of low voltages (below 50 VDC), they may still pose a threat of personal injury. Further, AC mains power voltages may be involved when assembling and using the EEZ BB3. High voltages can be lethal and in the worst case may lead to electrocution and death.

 

All documents, manuals, and information on the EEZ BB3 project web pages (please start with assembly instructions) and GitHub repository (https://github.com/eez-open/modular-psu) are intended only to assist the reader in the assembly and use of the product. Envox d.o.o. shall not be liable for any loss or damage arising from the use of any information or any error or omission in such information or any incorrect use of the product.

 

Use the following link to the User manual, and the SCPI Reference guide.

 

See also Crowd Supply’s Proclamation of users rights.