5.6. HCOPy

The Hardcopy commands are used to print the entire display to a specified file rather than “printing” to an external device.

 

SCPI command

Description

HCOPy

 

[:IMMediate]

Initiates hardcopy output

:DESTination {<destination>}

Sets the hardcopy destination

:SDUMp[:IMMediate]

Initiates hardcopy output

5.6.1. HCOPy:DESTination

Syntax

HCOPy:DESTination {<destination>}

Description

Not implemented yet

 

This command sets the hardcopy destination. The destination is always set to MMEMory (i.e. SD Card). This command is included only for compatibility with the SCPI standard. The destination file on the mass memory device is specified by the MMEMory:NAME command.

Usage example

HCOPY:DEST MMEM

Related Commands

MMEMory:CLOSe

MMEMory:NAME

MMEMory:OPEN

5.6.2. HCOPy[:IMMediate]

Syntax

HCOPy[:IMMediate]

Description

Not implemented yet

 

This command immediately initiates hardcopy output according to the current HCOPy setup parameters. This command is the same as HCOPy:SDUMp[:IMMediate].

Usage example

MMEM:NAME "sample1.png"

MMEM:OPEN

HCOP:DEST "MMEM"

HCOP

MMEM:CLOS

Related Commands

HCOPy:DESTination

HCOPy:SDUMp[:IMMediate]

5.6.3. HCOPy:SDUMp[:IMMediate]

Syntax

HCOPy:SDUMp[:IMMediate]

Description

Not implemented yet

 

This command initiates a screen dump of the entire TFT display's screen, and is the same as the HCOPy[:IMMediate] command.

Usage example

MMEM:NAME "sample2.png"

MMEM:OPEN

HCOP:DEST "MMEM"

HCOP:SDUM

MMEM:CLOS

Related Commands

HCOPy:DESTination

HCOPy[:IMMediate]